How can I get my ideal car radio installed in my car? Some car owners who want to upgrade their factory radio with a new aftermarket one may have the question. For those who don’t have any knowledge of the installation, it’s wise of them to go to a car radio center to have it installed or ask a professional for help. On the other hand, if you have some experience, you can also finish the installation with the help of a step-by-step installation guide. Here I’d like to show you a step-by-step 2004-2012 VW Volkswagen Caddy radio installation guide from Seicane to you.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004-2012 VW Volkswagen Caddy radio installation guide
Step 1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
Step 2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.
Step 3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory out of the dash.
Step 4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.
Step 5.Check all the accessories for the new Seicane car radio.
Step 6. Connect the harnesses to the back of the new Seicane car radio.
Step 7. Connect the Seicane car radio to your original car radio ‘s plugs.
Step 8: Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 9: Put the new Seicane radio into the dash and install the four screws.
Step 10: Install the trim panel into its original place.
Can you understand all the steps for the installation of the 2004-2012 VW Volkswagen Caddy radio? If not, you can consult your dealer. Please make sure you are clear about every step before you start to install your new radio. If you haven’t found an ideal one for your car, you can refer to this amazing 2004-2012 VW Volkswagen Caddy radio from Seicane. Here’s the link, please click:
Designed with the same dimension as the original radio, this popular 2004-2012 VW Volkswagen Caddy radio can be installed perfectly in your dashboard. Its large 7 inch multi-touch screen provides an attractive interface for you to improve your in-car environment. You can go anywhere with the latest GPS navigation system. The bluetooth technology to support hands-free calls and music streaming is also built with this unit. Just relax all the way with this intelligent 2004-2012 VW Volkswagen Caddy radio in your car!