1,043 views

8 steps to install a 2006-2010 NISSAN LIVINA car stereo with touch screen DVD player Quad-core CPU FM AM radio GPS navigation

To have a successful replacement for your factory radio, the installation is also very important. After you get an ideal car stereo, you may quickly have it installed by a professional. In that case, a correct installation guide can be much helpful. If you have the same dashboard as the below picture which is about an all-in-one Seicane 2006-2010 NISSAN LIVINA car stereo, you can take this guide as a reference.

2006-2010 NISSAN LIVINA car stereo after installation

2006-2010 NISSAN LIVINA car stereo after installation

 

 

Precautions:

  1. Please apply the parking brake before the installation.
  2. For your safety, please disconnect the negative cable on the vehicle battery.
  3. Please prepare a lever and a screwdriver for the installation.

 

 

2006-2010 NISSAN LIVINA car stereo installation guide

 

Step 1:

Use a screwdriver to remove two screws above the Nissan Frontier radio.

2006-2010 NISSAN LIVINA car stereo installation step 1

2006-2010 NISSAN LIVINA car stereo installation step 1

 

Step 2:  Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

2006-2010 NISSAN LIVINA car stereo installation step 2

2006-2010 NISSAN LIVINA car stereo installation step 2

 

Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

2006-2010 NISSAN LIVINA car stereo installation step 3

2006-2010 NISSAN LIVINA car stereo installation step 3

 

Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

2006-2010 NISSAN LIVINA car stereo installation step 4

2006-2010 NISSAN LIVINA car stereo installation step 4

 

Step 5: Connect the antenna in the back of the new Seicane car stereo and plug the electrical plugs running to the back of the car stereo. If you have any question on how to connect the antenna to new car stereo, please take the user manual as a reference or turn to the dealer for a wiring diagram.

 

Step 6: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.

 

Step 7: After the test, please put the new Seicane car stereo into the dash.

 

Step 8: Install all the screws and the trim panel into their original place.

 

Wish the above installation guide can be helpful for you. If you have any questions, you can turn to your dealer or a professional for help. Please make clear every step before you start to install it. If you don’t have any experience on the car accessories installation, you’d better have it installed by a professional.

 

In addition, you need to make sure your new stereo can be installed in your car without any gap. For your reference, you can refer to the following link which is about the latest 2006-2010 NISSAN LIVINA car stereo from Seicane, please click:

 

http://www.seicane.com/seicane-s127005-quad-core-pure-android-4-4-4-universal-bluetooth-dvd-in-dash-car-navigation-system-with-3g-wifi-am-fm-radio-mirror-link-obd2-16g-flash-backup-camera-hd-1024-600-multi-touch-capacitive-screen-aux

 

This NISSAN LIVINA car stereo allows you to play DVDs, CDs, VCDs, Bluetooth music, iPod, FM/AM radio, you can make your car into a pleasant paradise to entertain both yourself and your passengers in a long trip. Besides, you won’t have any difficulty in getting to your destination under the guidance of the latest GPS navigation system.

 

Keep both yourself and your passengers entertained all the way with this intelligent NISSAN LIVINA car stereo in your car. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *