928 views

A detailed installation guide for a 2004-2006 Toyota Corolla dvd player navigation system support 3G WIFI Bluetooth

Are you want to enjoy the newest functions in your car? Are you want to get more convenience and entertainment? Loaded with a range of comprehensive functions, the 2004-2006 Toyota Corolla dvd player navigation system is an ideal car stereo to replace your stock radio. In here, I’d like to introduce a step-by-step installation guide for a 2004-2006 Toyota Corolla dvd player navigation system from Seicane for your reference.

2004-2006 Toyota Corolla dvd player navigation system after installation

2004-2006 Toyota Corolla dvd player navigation system after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004-2006 Toyota Corolla dvd player navigation system installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

That’s all the detailed installation guide for a 2004-2006 Toyota Corolla dvd player navigation system. After reading this passage, you can try to install it by yourself. If you don’t have any experience of installation, it suggests you to the dealer or professional ask for help. Moreover, the suitable car stereo is important for your car. If you don’t have one, I’d like to share a 2004-2006 Toyota Corolla dvd player navigation system from Seicane to you.

http://www.seicane.com/android-aftermarket-gps-navigation-system-for-2004-2006-toyota-corolla-with-dvd-player-radio-bluetooth-mirror-link-hd-touch-screen-obd-dvr-backup-camera-tv-usb-sd-3g-wifi-ipod-s166229

The 2004-2006 Toyota Corolla dvd player navigation system can play both CD and DVD. With anti-shock and last position memory technology applied, you can watch movie or video in motion. Formats such as DVD/DIVX/MP4/MP3/MP2/VCD are compatible. Wish you have a good time with it from now!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *