Nowadays, more and more car owners upgrade their car radio regularly so as to make sure their car radio can be compatible with the latest features. Is your car radio compatible enough to fit with the most up-to-date features? If not, it is suggested that you should replace your original factory radio with an all-in-one car radio which can bring you a brand new experience. And if you are interested in installing the car radio, you can do it on your own with the correct instructions. This article aims to share the installation guide of a 2011 2012 Suzuki SWIFT Bluetooth car radio GPS navigation for you as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011 2012 Suzuki SWIFT car radio installation instruction
1.Remove the hazard switch with a plastic removal tool.
2.Remove the trim panel with a plastic removal tool.
3.Unscrew the two screws on top of the radio.
4.Remove the original radio and take off the connectors at the back.
5.Check all the accessories for the new Seicane car radio.
6.Connect the harnesses to the back of the new Seicane car radio.
7.Connect the Seicane car radio to your original stereo’s plugs.
8.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9.Put the new Seicane car radio into the dash
10. Put everything into their original place. All the installation is done.
That’s all about the whole installation process for a 2011 2012 Suzuki SWIFT Bluetooth car radio GPS navigation. Wish it can be helpful for you. If you encounter any problems before or during the installation, you can consult your dealer or ask a professional for help. But if you haven’t had a suitable car radio yet, I’d like to recommend a wonderful 2011 2012 Suzuki SWIFT Bluetooth car radio GPS navigation from Seicane to you. You can click the following link for more details.
This remarkable 2011 2012 Suzuki SWIFT Bluetooth car radio GPS navigation, featured with the upgraded Android 5.1.1 operation system and a powerful Quad-core processor, greatly facilitate your easy operation. The 3D GPS navigation system in high precision is specially built up for you to find the correct ways to your ideal destinations without mistake and being late. Moreover, with the Bluetooth technology in this unit, you can easily get access to hands-free calls as well as streaming music to keep you safe and pleasant all the way through simple connection between your enabled mobile phone and this unit. Wish you like it. Good luck to you!