1,456 views

A step-by-step installation guide for a 2007-2014 Mazda CX-7 car stereo with DVD Player Mirror Link OBD DVR Bluetooth TV USB SD 3G WIFI

The car stereo is very important part in the car and you can enjoy the convenience and comfort from it. However, the old factory radio can’t meet most of your needs anymore in nowadays. It’s a best choice for you to upgrade a new car stereo. I’d like to share a step-by-step installation guide for a 2007-2014 Mazda CX-7 car stereo from Seciane. If you are the car owner of Mazda CX-7, you can take it as reference.

2007-2014 Mazda CX-7 after installation

2007-2014 Mazda CX-7 after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid

any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2014 Mazda CX-7 car stereo installation guide

1. Remove the panel around the radio by using pry tool.

Remove the panel around the radio by using pry tool

Remove the panel around the radio by using pry tool

2. Remove the four screws holding in the radio.

Remove the four screws holding in the radio

Remove the four screws holding in the radio

3. Gently take the factory radio out of the dashboard.

Gently take the factory radio out of the dashboard

Gently take the factory radio out of the dashboard

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio ‘s plugs.

8. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t,

please check whether all the cables are connected correctly.

9. Put the new Seicane radio into the dash.

10. Put everything into their original place.

Wish this installation guide can give you some help in the installation. If you find the picture shown above is little different from your car, please rest assured the installation guide is generic. Or you can go to the dealer or professionals ask for help.

In addition, the first thing for you to do before installation is find the suitable car stereo for your car. If you are looking for one, this wonderful 2007-2014 Mazda CX-7 car stereo from Seicane is one of the best choice for you.

http://www.seicane.com/autoradio-android-gps-navigation-system-for-2007-2014-mazda-cx-7-with-dvd-player-mirror-link-multi-touch-screen-obd-dvr-bluetooth-rear-view-camera-tv-usb-sd-3g-wifi-ipod-s167007

Specially manufactured for 2007-2014 Mazda CX-7, this in dash Android 5.1.1 GPS navigation system is an ideal car stereo to upgrade your in-car environment. A big nice 7 inch multi-touch screen with 1024*600 HD pixel resolution simplifies the navigation operation and provides a wonderful display for watching all kinds of videos. You will find it easier to reach your destination with the help of the GPS navigation. The Bluetooth pairing connectivity is available to have hands-free calls and stream music. The unit has a rearview camera input to install a backup camera to aid in parking. Wish you like it and enjoy the time with it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *