649 views

A step-by-step installation guide for a 2013 2014 2015 VW Volkswagen Santana car stereo with HD touch screen OBD DVR CANBUS Bluetooth USB SD Rear view camera

Do you desire an exciting driving experience on your way to destination? If yes, you can consider to upgrade your factory radio with a multifunctional car stereo which can support a lot of features in your car. If you want to install on your own, a detailed installation guide can be much helpful. Here comes a step-by-step 2013 2014 2015 VW Volkswagen Santana car stereo installation guide from Seicane. If you also have a 2013 2014 2015 VW Volkswagen Santana , you can follow it for the installation of your new car radio.

2013 2014 2015 VW Volkswagen Santana car stereo after installation

2013 2014 2015 VW Volkswagen Santana car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003 2004 2015 VW Volkswagen Santana car stereo installation guide 

1.Remove the panel with plastic sled pry tool.

Remove the panel with plastic sled pry tool

Remove the panel with plastic sled pry tool

2. Use a hex screwdriver to remove four captive screws of the original radio.

Use a hex screwdriver to remove four captive screws of the factory radio

Use a hex screwdriver to remove four captive screws of the factory radio

3. Pull out the original radio.

Pull out the factory radio

Pull out the factory radio

4. Unplug connectors at the back of the original radio.

Unplug connectors

Unplug connectors

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original car radio ‘s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane stereo into the dash.

10. Put everything into their original place.

Can you understand all the installation steps for a 2013 2014 2015 VW Volkswagen Santana car stereo ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2013 2014 2015 VW Volkswagen Santana car stereo from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/8-inch-android-2013-2014-2015-vw-volkswagen-santana-radio-dvd-player-gps-navigation-system-with-mirror-link-hd-touch-screen-obd-dvr-canbus-bluetooth-usb-sd-rear-view-camera-tv-3g-wifi-ipod-s168007

This popular 2013 2014 2015 VW Volkswagen Santana car stereo comes with a real-time GPS navigation system can provide landmark display, 3D street view, millions of points of interests(POIs), route planning, turn-by-turn direction and voice prompts for you to get to your destination smoothly. You can also add a digital TV as an option to watch live TV shows in your car. Have fun and go with it on all your trips from now on!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *