984 views

An easy installation instruction for a 2003-2010 Toyota Land Cruiser head unit with Radio GPS DVD Player Bluetooth 3G WIFI

How can I get the most up-to-date navigation system and entertainment function in my car? The best way for you is to upgrade your old factory radio. You can not only get the anywhere by the 3D navigation system, but also can play the music and entertain your passengers. It’s also easily for you to install the new head unit. In the next part, I’d like to share an easy installation instruction for a 2003-2010 Toyota Land Cruiser head unit from Seicane with you and hope you can learn something from it.

2003-2010 Toyota Land Cruiser head unit after installation

2003-2010 Toyota Land Cruiser head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2010 Toyota Land Cruiser head unit installation instruction

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash

1-1. Remove the panel with a lever and pull it away from dash

1-2

1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio

Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-2

3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t,

please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

 

That’s all the detailed installation instruction for a 2003-2010 Toyota Land Cruiser head unit. If you can’t understand it very well, it suggests you to the dealer or professional ask for help. If the picture shown above is different from your dashboard, please rest assured that the installation instruction is much same. Moreover, it’s important for you to check whether the new head unit can work well in your car first. If you still looking for one, I’d like to introduce a multifunctional 2003-2010 Toyota Land Cruiser head unit from Seicane to you.

http://www.seicane.com/android-touch-screen-radio-gps-sat-navi-for-2003-2010-toyota-land-cruiser-with-dvd-player-bluetooth-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-ipod-mirror-link-s166957

This multimedia 2003-2010 Toyota Land Cruiser head unit equipped with worldwide real-time navigation function of high accuracy. You can get to anywhere with this function. You can also make hand-free calls and play favorite music by Bluetooth function. Let’s enjoy the good time with it from now!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *