In the past, a car is just a means of transportation and nothing more. But at present, the up-to-date technology allows you to install a modern car radio for you beloved car, which can not only provide you with many practical functions but also entertainment features. Here comes an installation guide for a 2011-2014 KIA PICANTO. If you are an owner of this vehicle type, this guide is worth for you reading.
2011-2014 KIA PICANTO 3G WIFI car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011-2014 KIA PICANTO car radio installation guide
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s ok although you don’t totally understand the above installation guide. Under this circumstance, don’t hesitate to seek help from your dealer or arrange a professional to install it directly. However, there is something more important before the installation. That is to see whether your new car radio is compatible with your car. If not, you need to change it. The link below is about a car radio from Seicane for a 2011-2014 KIA PICANTO, you can check it for more information if you are willing to.
When you feel tired an have a rest in a resting area, you can relax yourself by enjoying a very wonderful video or film thanks to the large 8 inch multi-touch screen with HD 1024*600 pixel resolution. And such a large screen will make you operate easily and enjoy the view clearly. As a multimedia device, this unit can play many formats, like DVD, MP3, MP4,VCD,etc, which can supply your different needs. Good luck to you!