To have a great driving experience, some car owners may decide to replace their car with a new one. However, it is absolutely unnecessary for it cost a very large amount of money compared with upgrading a car radio. You can greatly reduce your budget for a better in-car environment or driving experience by replacing your factory radio with a brand new car radio which comes with a lot of modern features. Here comes a detailed installation instruction on a 2005-2012 Mercedes Benz ML Class W164 Bluetooth audio radio from Seicane. If you also have the same dashboard, you can refer to this related instruction.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2005-2012 Mercedes Benz ML Class W164 car radio installation instruction
1. The original car radio.
2.Pry the bottoming panel out of the dash with a plastic knife.
3.Pry the air conditioner panel out and remove it.
4.Remove two screws that fixed the radio on the dashboard with a screwdriver.
5. Use your finger to pull the buckles down.
6.Gently pull the factory radio out of the dash.
7. Then unplug the connectors at the back of the factory radio.
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original stereo’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
Now can you succeed in the car radio installation with the help of the related installation instruction? If not, you can seek help from your dealer and professional to find out what’s wrong with your installation. If you cannot still solve the problems, you’d better go to a car stereo upgrade centre to have the new radio installed. Besides, there is another key point that you must make sure your new radio can fit with your car very well. If it is not suitable, you can check the following link which is about a 2005-2012 Mercedes Benz ML Class W164 Bluetooth audio radio from Seicane I recommend to you.
This intelligent car radio is compatible with a wide range of features which can brings you a brand new driving experience. With its Bluetooth feature, it allows you to make, receive or reject phone calls and enjoy streaming music without keeping your hands off the steering wheel. You can travel around an unfamiliar city and don’t have to worry about getting lost due to the powerful built-in GPS navigation system. The back-up camera input also enables you to connect a camera to make parking easier and safer. If you like this 2005-2012 Mercedes Benz ML Class W164 Bluetooth audio radio, don’t forget to add it to you cart. Good luck to you!