554 views

An Straightforward installation guide for a 2011 2012 KIA RIO car radio with gps nav Bluetooth dvd player

When you get bored and tired because of long-time driving and your old factory radio can’t refresh you any more, then it is high time for you to replace your factory radio with a brand new one with both upgraded and new additional features. This is an article on an installation guide for a 2011 2012 KIA RIO car radio from Seicane. If you have the same vehicle type, then you can refer to it.

Seicane S168047 2011 2012 KIA RIO car radio after installation

Seicane S168047 2011 2012 KIA RIO car radio after installation

 

Please notice before the installation:

1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2.A lever and a screwdriver need to be prepared before the installation.

3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011 2012 KIA RIO car radio installation steps

1.The original car radio.

The original car radio

The original car radio

2.Pry around the edges of the panel with a lever.

Pry around the edges of the panel with a lever

Pry around the edges of the panel with a lever

3.Remove the panel.

Remove the panel

Remove the panel

4.Unscrew four screws holding the original car radio in place with a screwdriver.

Unscrew four screws holding the original car radio in place with a screwdriver

Unscrew four screws holding the original car radio in place with a screwdriver

5.Gently take the factory radio out of the dashboard.

Gently take the factory radio out of the dashboard

Gently take the factory radio out of the dashboard

6.Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Now can you finish the installation of a car radio successfully with the help of the above guide? If not, don’t be disappointed. It is highly suggested that you should consult your dealer or ask a technician for help. Besides, one key factor in the successful installation is to have a compatible car radio with your beloved car. If you are still searching for it, I’d like to share a great 2011 2012 KIA RIO car radio from Seicane with you. You can check the link below and see if you like it.

http://www.seicane.com/oem-android-gps-navigation-system-for-2011-2012-kia-riowith-hd-1024-600-touch-screen-radio-bluetooth-dvd-player-obd2-dvr-rearview-camera-tv-1080p-video-usb-sd-3g-wifi-steering-wheel-control-mirror-link-s168047

Thanks to built-in Android 5.1.1 operation system and 1.6GHz Cortex A9 quad-core CPU, this intelligent car radio may be the smoothest and fastest multimedia device for 2011 2012 KIA RIO. There are many surprising features for this GPS Bluetooth car radio, which includes 3D GPS Navigation System, Bluetooth technology, DVD player, FM/AM radio, Backup camera, etc. This all-in-one car radio will perfectly replace your old car radio with its various attractive features. Don’t hesitate to take it along with your journey. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *