Have you ever thought about removing your factory radio and installing a brand new multifunctional car radio for your beloved car? If yes, you can search online for a related car radio and read it carefully to have a general understanding of the car radio installation. The following is a 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard. Wish this guide is helpful for you.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car stereo installation instruction
1. The original car radio.
2. Remove the surrounding trim panel with a plastic removal tool.
3. Remove two screws fixed the radio on the dashboard.
4. Gently pull out the original car radio.
5. Unplug the connectors and cables at the back of the radio.
6. Remove the A/C control and unplug the connectors.
7. Remove two screws holding the heat vent.
8. Remove screws so as to remove radio frame.
9. Check all the accessories for the new Seicane car radio.
10. Connect the harnesses to the back of the new Seicane car radio.
11. Connect the Seicane car radio to your original radio’s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for your installation to some degree. If you encounter any problems you cannot deal with by yourself, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to finish the whole installation process, you’d better arrange a technician to help you install the new car radio.
Besides, it is very crucial for you to select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is an amazing 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio from Seicane. Here comes the related link, please click:
This car radio is running on the newest Android 8.0 operation system, a high-quality 8-core 1.5 GHz RK-PX5 A53 processor, and 32GB INand Flash as well as 4GB RAM. With this car radio installed in your car, you will embrace a brand new driving life.
Even though you are not good at identifying directions, you won’t get lost any more thanks to this car radio. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you are able to locate where you are currently and find the right way to arrive at your desired destinations. And this unit comes with dual zone function, so you can freely listen to your favorite music while navigating.
Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you pair your Bluetooth-enabled mobile phone with this unit.
If you like this unit, just don’t hesitate to add it to your shopping cart.