To keep your passengers entertained all the way, you can easily upgrade your factory radio with a new car radio which can support almost all the popular multimedia formats, so that you can play whatever you want to amuse your passengers. To help you install your new radio, I’d like to share a detailed installation guide about a 2002-2008 Dodge Viper head unit with you. If you have the same dashboard as the image below from Seicane, this article can help you a lot on the installation.
2002-2008 Dodge Viper head unit after installation
Please notice before the installation:
1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2.A lever and a screwdriver need to be prepared before the installation.
3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002-2008 Dodge Viper head unit installation steps
1.Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car
2-2.Take the panel off the dash and disconnect the wires from the car
3.Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-2.Take out the unit and disconnect the wire harness at the back of the unit
5.Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original car radio ‘s plugs.
7-1. Connect the Seicane car stereo to your original car radio ‘s plugs
7-2. Connect the Seicane car stereo to your original car radio ‘s plugs
8.Put the new Seicane car radio into the dash.
9.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10.Put trim panel back on your new Seicane car radio after the normal test.
Above all, you need to make clear about every step before you start to install this 2002-2008 Dodge Viper head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an amazing 2002-2008 Dodge Viper head unit from Seicane to you. Please click for more details:
This remarkable 2002-2008 Dodge Viper head unit comes with a large 5 inch multi-touch screen with 800*480 pixel resolution to improve the display and simplify the operation. With the Bluetooth technology, you can easily pair with your mobile phone to make and receiver hands-free calls and stream music, so that a safe and pleasant journey will be always with you. Good luck to you!