635 views

Easy Tips for a 2015 Buick Excelle Radio Removal and Installation with Bluetooth Stereo GPS DVD Player

At present, more and more car owners try to pursue a more convenient and comfortable car interior environment while they are driving. And one of the easiest ways is to upgrade their factory radios with new advanced car radios. So how to upgrade a car radio easily? Please look at the image below, which is about a 2015 Buick Excelle car radio after installation. If you also have the same dashboard, you can refer to the following 2015 Buick Excelle car radio installation guide from Seicane to further understand the installation.

2015 Buick Excelle car radio after installation 2015 Buick Excelle Radio

2015 Buick Excelle car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2015 Buick Excelle car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Before the installation, please make clear every detailed step. If you have any questions during the whole process, you can turn to your dealer for help. A wiring diagram from the dealer can do some help for you especially when you making the wiring. If you haven’t got a suitable car radio for your car, you can take the following 2015 Buick Excelle gps bluetooth dvd car radio as a reference. Please click:

http://www.seicane.com/10-2-inch-android-2015-buick-excelle-radio-gps-navigation-hd-touchscreen-bluetooth-music-usb-obd2-aux-rds-backup-camera-digital-tv-dvr-steering-wheel-control-s301125

With this powerful car radio installed in your car, you can take your driving experience up a notch. The main features of this car radio consist of 3D GPS navigation, Bluetooth technology, FM/AM radio, Ipod, USB connection, etc., which make an intelligent all-in-one car radio for your car to satisfy all your various needs on the way. Besides, after the installation, your steering wheel control will still remain working. If you like it, just add it to your cart. Wish you have a good time accompanied by this 2015 Buick Excelle car radio.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *