If you have a plan to remove your factory radio and install a new aftermarket car radio for your car, you can search online for a correct installation guide from Seicane to help you. This article mainly aims to introduce a car radio installation instruction on a 2 DIN Universal Toyota Hyundai Kia Nissan Volkswagen Suzuki car radio. If you have the same or similar dashboard, you can refer to the following car radio installation instruction. Wish this installation instruction can be helpful for you.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2 DIN Universal Toyota Hyundai Kia Nissan Volkswagen Suzuki car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
If you have problems you don’t know how to deal with, please feel free to consult your dealer or seek help from a professional. Or during the installation, you can ask someone experienced to help you along side. Anyway, if you haven’t got a suitable car radio for your car yet, here I would like to recommend an amazing 2 DIN Universal Toyota Hyundai Kia Nissan Volkswagen Suzuki car radio from Seicane to you. For more details, please click:
This amazing car radio can meet almost all your different needs in car since it is integrated with a variety of upgraded and new features, mainly including 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, etc.
With the assistance of the turn-by-turn directions and voice prompts provided by the high-accuracy GPS navigation system, you can easily locate where you are currently and navigate to your desired destinations.
What’s more, you can also make full use of this unit’s entertainment features to gain a lot of joyfulness in car. In conclusion, with this car radio installed in your car, you will able to embrace a brand new driving experience.
Wish you enjoy your driving accompanied by this car radio. Good luck!