437 views

How to Achieve a Double Din Universal Car Stereo with DVD Player Bluetooth GPS Navigation System

Believe it or not, it is not so difficult for you to remove and install a car stereo by yourself. If you have some related installation experience, you can find a related installation guide to teach you how to finish the whole installation process on your own. If you haven’t had any installation experience at all, you can ask for a professional for help. Anyway, to have a general understanding of the car stereo installation process, you can refer to an installation guide. The following is a Double Din universal car stereo installation guide, you might as well take it as a reference.

Double Din Universal Car Stereo after installation

Double Din Universal Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Double Din Universal Car Stereo Installation Guide

Step 1: Use a screwdriver to remove two screws above the original car radio.

Use a screwdriver to remove two screws above the original car radio

Use a screwdriver to remove two screws above the original car radio

Step 2: Remove the trim panel. Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel. Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel

Remove the trim panel. Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel

Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Step 5: Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

Step 6: Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

Step 7: Connect the Seicane car stereo to your original car radio’s plugs.

Step 8: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.

Step 9: After the test, please put the new Seicane car stereo into the dash.

Step 10: Install all the screws and the trim panel into their original place.

 

Now can you fully understand the above installation steps? If you have any doubts, you can contact your dealer for seeking advice, or turn to a professional for help. Anyway, before installation, first of all, it is very essential for you to select an ideal car stereo. If you have no ideas, here I would like to share a remarkable double din universal car stereo from Seicane to you. For more details, please click:

https://www.seicane.com/2-din-universal-android-radio-gps-navigation-system-car-stereo-with-mirror-link-wifi-dvd-player-bluetooth-1080p-video-usb-s126006e

This Android 6.0 car stereo can be compatible with a wide range of comprehensive features, including 3D GPS navigation, FM/ AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, CD/DVD Player, file management, AUX, Steering wheel, SD card connection, etc.

The worldwide real-time GPS system is specially built in this unit, therefore you can make full use of it to know your current locations and have the most suitable route option to get to your desired destinations through turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, while navigating, you can freely play music from radio, TV, AV, etc under GPS mode and the music can automatically switch to GPS voice.

While as for entertainment features, you can utilize this unit’s DVD player function to play videos, TV programs or movies, etc to relax both yourself and your passengers.

This car stereo is at a reasonable price now. If you like it, don’t hesitate to add it to your shopping cart right now. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *