The following picture is an amazing 2002-2008 Chrysler Aspen Concorde Pacifica car stereo from Seicane after installation. As most of the car stereos nowadays are with plug-and-play feature, it is quite easy to install a new stereo by yourself. If you are fed up with the single function of your factory radio in a 2002-2008 Chrysler Aspen Concorde Pacifica, it’s a wise choice for you to upgrade it with a new aftermarket one. The related easy-to-understand car stereo installation steps are as follows.
2002-2008 Chrysler Aspen Concorde Pacifica car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2008 Chrysler Aspen Concorde Pacifica car stereo installation steps
1. Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2. Take the panel off the dash and disconnect the wires from the car.
Take the panel off the dash and disconnect the wires from the car
2-1
3. Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4. Take out the unit and disconnect the wire harness at the back of the unit.
Take out the unit and disconnect the wire harness at the back of the unit
4-1
5. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
6. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
7. Connect the Seicane car stereo to your original car radio’s plugs.
Connect the Seicane car stereo to your original car radio’s plugs
8. Put the new Seicane car stereo into the dash.
9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put trim panel back on your new Seicane car stereo after the normal test.
Now can you achieve the whole installation process of a 2002-2008 Chrysler Aspen Concorde Pacifica car stereo? If you meet any difficulties during the whole installation process, you can ask a professional, someone experienced or your dealer for help.
Besides, it is significant to pick an ideal aftermarket stereo which makes your installation with great satisfaction. If you don’t know how to select a suitable stereo, it’s recommended you check out the following link which is an excellent 2002-2008 Chrysler Aspen Concorde Pacifica Radio Stereo DVD Player from Seicane.
This intelligent car stereo from Seicane, designed for 2002-2008 Chrysler Aspen Concorde Pacifica, provides you with a smoother and more stable performance due to its Android 4.4.4 operation system and quad-core CPU.
With the GPS navigation system for turn-by-turn direction and voice prompts, you can easily gain the best route to reach your destinations and you don’t have to worry about getting lost even you are in an unfamiliar place. To sync with your cell phone, this unit enables you to have hands-free phone calls and enjoy streaming music with your hands on the steering wheel control.
With wifi built in and 3g internet supported, you can easily get access to convenient e-life whenever and wherever. Wish you like it and good luck to you!