490 views

How to Install a 2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i Car Stereo with Bluetooth GPS Navigation System

Some car owners may think it easy for them to get an ideal car stereo but hard to install it. As a matter of fact, it is not so difficult to install a new car stereo with the guidance of a related installation guide. If you have some related installation experience before, you can find an installation guide and follow it to finish the whole installation process on your own. If you haven’t had any experience, you’d better have the car stereo installed by a professional. Here I’d like to share a detailed 2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i car stereo installation guide about a 2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i car stereo with you. If you also have the same car model, you can take this guide as a reference.

2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i Car Stereo after installation

2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i car stereo installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can get some inspiration from the above installation guide. If you have any doubts, please don’t over worry. You just need to contact your dealer for seeking advice, communicate with someone experienced or turn to a professional for help. Besides, it is very essential for you to select an ideal car stereo for your car. If you have no ideas, I’d like to recommend a remarkable 2004-2012 BMW 1 Series E81 E82 116i 118i 120i 130i car stereo from Seicane with you. For more details, please click:

http://www.seicane.com/android-quad-core-hd-touchscreen-1024-600-2004-2012-bmw-1-series-e81-e82-116i-118i-120i-130i-with-bluetooth-radio-dvd-navigation-system-aux-wifi-mirror-link-obd2-s127050

You will definitely embrace a brand new driving experience thanks to comprehensive features supported by this multifunctional car stereo and the higher configuration and performance of this car stereo.

This car stereo is equipped with the worldwide real-time 3D GPS navigation of high precision. After you press the button “NAVI”, you can get access to features like current location, landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc. Therefore, you can be accurately led to your desired destinations. Besides, thanks to dual zone function, you can freely listen to beautiful music behind the scene under GPS mode and the music can switch to the GPS voice automatically.

Apart from GPS function, there are a lot of other practical and entertainment features being compatible with this unit, including Bluetooth hands-free calls, Bluetooth music, FM/AM radio tuner, CD/DVD player, AUX function, USB port, SD card connection, steering wheel control, etc.

Don’t hesitate to add this all-in-one unit to your shopping cart right now. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *