Look at the image below which is a 2007 2008 2009 2010 2011-2016 Fiat Ducato car radio from Seicane after installation. It looks very amazing, doesn’t it? This article is mainly about how to remove the factory radio and install the new car radio for a 2007 2008 2009 2010 2011-2016 Fiat Ducato. If you are an owner of 2007 2008 2009 2010 2011-2016 Fiat Ducato and plan to replace your factory radio, you can read this article carefully. Wish it can be helpful for your installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2007 2008 2009 2010 2011-2016 Fiat Ducato car radio
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Above is the detailed guide on how to remove and install a 2007 2008 2009 2010 2011-2016 Fiat Ducato car radio. If you have any doubts, you can turn to your dealer or a professional for help.
Only with a suitable car radio, the installation can make sense. So before installation, you have to confirm that your new car radio can fit with your car well. If it is not compatible, you’d better quit it and purchase another one. Here I would like to share an amazing 2007 2008 2009 2010 2011-2016 Fiat Ducato car radio from Seicane with you.
This car radio’s operation system has been upgraded to the most advanced Android 7.1.1 version and it has a powerful quad-core CPU processor.
Wherever you are traveling, you can find the correct way to reach any locations you would like to go to under the guidance of turn-by-turn direction and voice prompts provided by the high-end 3D GPS navigation system of high accuracy. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.
Besides, you can make full use of this unit’s function as a multimedia player to play various kinds of audio and video formats to relax both yourself and your passengers, which include DVD, DIVX, MP4, MP3, MP2, VCD, etc. Therefore, you can gain a lot of enjoyment during installation.
If you like this unit, just purchase it and regard it as your best road companion from now on!