923 views

How to install a new 2001-2008 Mercedes Benz G W463 radio with easy 12 steps

First shows you an appealing 2001-2008 Mercedes Benz G W463 radio after installation from Seicane.

1. The original dashboard

1. The original dashboard

 

 

To install such a multifunctional radio is worth your trying because it can not only improve your car interior but also bring you a brand new driving experience. Some of you may have the installation experience and want to install a new radio on your own, then you can refer to the following step-by-step Mercedes Benz G W463 radio installation guide to help with the installation.

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

 

2001-2008 Mercedes Benz G W463 radio installation guide

1. The original dashboard.

1. The original dashboard

1. The original dashboard

 

2. Use a lever to release the decoration panel and remove the cigarette lighter.

2. Use a lever to release the decoration panel and remove the cigarette lighter

2. Use a lever to release the decoration panel and remove the cigarette lighter

 

3. Remove two screws under the 6-disc CD changer and take out the CD changer.

3. Remove two screws under the 6-disc CD changer and take out the CD changer

3. Remove two screws under the 6-disc CD changer and take out the CD changer

 

4. Remove the two screws marked with red arrows and pull out the CD player.

4. Remove the two screws marked with red arrows and pull out the CD player

4. Remove the two screws marked with red arrows and pull out the CD player

 

5. Connect the cables in the package.

a. Connect with the power cable in the car.

b. Socket for the speaker cable plug in the car.

c. Connect CAN-H, CAN-L with CAN-BUS

d. Connect CAN-TX.

5. Connect the cables in the package

5. Connect the cables in the package

 

6. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green)③ with the CAN-BUS socket marked in the picture.

6. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green)③ with the CAN-BUS socket marked in the picture

6. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green)③ with the CAN-BUS socket marked in the picture

 

7. Pry the decoration panel beside the driver’s seat, change fuse from 5A TO 10A.

7. Pry the decoration panel beside the driver's seat, change fuse from 5A TO 10A

7. Pry the decoration panel beside the driver’s seat, change fuse from 5A TO 10A

 

8. Remove the screws for fastening the car pc in the left of the trunk.

8. Remove the screws for fastening the car pc in the left of the trunk

8. Remove the screws for fastening the car pc in the left of the trunk

 

9. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows.

9. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows

9. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows

 

10. Remove the amplifier in the car.

10. Remove the amplifier in the car

10. Remove the amplifier in the car

 

11. Connect the speaker cable with the speaker socket ②.

11. Connect the speaker cable with the speaker socket 2

11. Connect the speaker cable with the speaker socket 2

 

12. Turn on the new Seicane radio to have a careful check if everything works well.

 

Above all, please make sure you have a clear understanding before you start to install your new radio in your car. If it’s the first time for you to upgrade your factory radio, then you can ask a professional for help. If you don’t have an ideal radio for your car, then you are recommended to check for this Seicane 2001-2008 Mercedes Benz G W463 radio, please click:

 

http://www.seicane.com/aftermarket-radio-gps-navigation-system-for-2001-2008-mercedes-benz-g-w463-with-dvd-player-bluetooth-rearview-camera-tv-tuner-dvr-usb-sd-canbus-1080p-video-s127501d

 

This Mercedes Benz G W463 radio is upgraded to the up-to-date WINCE 6.0 CORE operation system to provide you with a greater performance than ever. You will be greatly satisfied with its latest GPS navigation system which can guide you to a variety of locations on time. Besides, the bluetooth technology for hands-free calls and streaming music is also included for you to keep safe and pleasant all the way.

 

Just go on all trips with this multifunctional Mercedes Benz G W463 radio and have a wonderful time with it! Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *