Are you confident of replacing your old factory radio with a upgraded stereo on your own? Do you think you can install a car stereo without much expertise? Actually, it is unnecessary for you to have a lot of professional knowledge if you are about to install a car stereo. With a correct installation guide and some related car accessories installation experience, you can also succeed in the installation by yourself. The following is a 2004-2009 Mazda 3 gps dvd car stereo installation guide from Seicane, if you have the same or similar dashboard, you can refer to it to help with your new car stereo installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2004-2009 Mazda 3 car stereo installation guide
1.Remove the trim panel with a plastic removal tool.
2.Remove two screws that fixed the car radio on the dashboard.
3.Take out the original car radio.
4.Unplug connectors at the back of the original car radio.
5.Check all the accessories for the new Seicane car stereo.
6. Connect the harnesses to the back of the new Seicane car stereo.
7. Connect the Seicane car stereo to your original stereo’s plugs.
8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car stereo into the dash.
10. Put everything into their original place. All the installation is done.
Now do you think it is impossible for you to achieve the whole car stereo installation? If you have any question, you are welcome to seek advice from your dealer or ask someone experienced to help you. But if you are still searching online for a suitable car stereo for your, I’d like to share an amazing 2004-2009 Mazda 3 gps dvd car stereo from Seicane with you. The related link is as follows, please click:
This intelligent, specially designed for 2004-2009 Mazda 3, which is one of best choices to replace your factory radio. Armed with the most advanced Android 5.1.1 operation system as well as a powerful RK3188 1.6 GHz Cortex A9 quad-core CPU, this 2004-2009 Mazda 3 gps dvd car stereo are able to facilitate the smooth operation. A wide of upgraded functions and brand new features are compatible to provide you with the best services, including high-accuracy 3D GPS, Bluetooth technology, DVD/CD player, FM/AM radio, backup camera, USB&SD connection, steering wheel control, etc. If you like it, don’t hesitate to take it home. Wish you all the best!