601 views

How to Remove and Install a 2014 2015 2016 Honda CITY (RHD) Car Radio in a Short Time

An ideal car radio installed in your car not only meets almost all your needs in your car but also offers great joyfulness to your. Therefore, if you are not satisfied with your factory radio, you can think about replacing it with a new aftermarket car radio. Here I would like to share a detailed    2014 2015 2016 Honda CITY (RHD) car radio installation guide from Seicane with you. If you also own the same dashboard as the image shown below, you can take this guide as a reference.

2014 2015 2016 Honda CITY (RHD) Car Radio after installation

2014 2015 2016 Honda CITY (RHD) Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 2016 Honda CITY (RHD) car radio installation guide

1. Remove the bottom panel with a plastic removal tool and then unplug the connector behind.

Remove the bottom panel with a plastic removal tool and then unplug the connector behind

Remove the bottom panel with a plastic removal tool and then unplug the connector behind

1-1

1-1

2. Remove screws below the radio with a screwdriver.

Remove screws below the radio with a screwdriver

Remove screws below the radio with a screwdriver

3. Remove the panel on the left of the radio.

Remove the panel on the left of the radio

Remove the panel on the left of the radio

4. Release the panel one the right side of the radio.

Release the panel one the right side of the radio

Release the panel one the right side of the radio

5. Take out the original radio, please use a plastic removal tool if necessary.

Take out the original radio, please use a plastic removal tool if necessary

Take out the original radio, please use a plastic removal tool if necessary

6. Disconnect the connectors at the back of the radio.

Disconnect the connectors at the back of the radio

Disconnect the connectors at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any doubts, you can browse some professional websites, consult your dealer, or communicate with someone experienced. And you can also seek help from a professional technician if you do think the installation process is too complicated.

Besides, it is essential for you to pick an ideal car radio for your beloved car. Here I would like to recommend a marvelous 2014 2015 2016 Honda CITY (RHD) car radio from Seicane to you. You may check out the following link for more details.

https://www.seicane.com/android-hd-touch-screen-radio-gps-navigation-system-for-2014-2015-2016-honda-city-rhd-with-bluetooth-music-mirror-link-obd2-3g-wifi-backup-camera-1080p-video-aux-steering-wheel-control-s18h228r

This car radio is based on the most advanced and stable Android 7.1.2 operation system and it is loaded with a high-quality quad-core CPU processor, so you are going to have a much easier, smoother and faster operation experience.

With the assistance of the text-to-speech guidance provided by the high-accuracy GPS navigation system, you are able to easily locate where you are and navigate to your desired destinations. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Wish you have a relaxing trip accompanied by this car radio. Good luck!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *