If you have a new plan to replace your factory radio with a new aftermarket car radio, you’d better find a related installation guide to help you with the installation. This article is mainly about how to remove and install a 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio. If you happen to have the same or similar dashboard, then you can refer to the following step-by-step 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio installation instruction.
2006 2007 2008 2009 2010-2012 Toyota RAV4 GPS Bluetooth DVD Car Radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio installation instruction
1. The original car radio.
The original car radio
2. Remove the panel by using plastic removal tool.
Remove the panel by using plastic removal tool
3. Unplug the hazard warning lights.
Unplug the hazard warning lights
4. Remove the left panel and unplug the switch.
Remove the left panel and unplug the switch
5. Unplug the switch.
Unplug the switch
6. Remove four screws.
Remove four screws
7. Pull out the factory radio.
Pull out the factory radio
8. The back of the original car radio.
The back of the original car radio
9. Remove 8 screws from original car radio.
Remove 8 screws from original car radio
10. Remove 2 screws at the top of the new radio.
Remove 2 screws at the top of the new radio
11. Install 8 screws to new car radio.
Install 8 screws to new car radio
12. Plug into factory plugs.
Plug into factory plugs
13. All plugs after connection.
All plugs after connection
14. Check all the accessories for the new Seicane car radio.
15. Connect the harnesses to the back of the new Seicane car radio.
16. Connect the Seicane car radio to your original car radio ‘s plugs.
17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
18. If the new Seicane car radio works well, put it into the dash.
19. Put everything into their original place, and all the installation is done.
Wish you can gain some inspiration from the above installation steps. If you comes across any problems you cannot solve independently, please feel free to seek help from your dealer, someone experienced or a professional technician. Besides, it is especially crucial for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio from Seicane. Here comes the link, please click:
This car radio with a large 10.2 inch multi-touch screen comes with a wide range of practical and entertainment features which can bring you a brand new driving experience.
Thanks to the powerful worldwide real-time GPS navigation system of this unit, you will be able to easily know your current locations and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts even you are travelling around an unfamiliar place.
And thanks to Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute hands-free calls as well as listen to streaming music from your mobile phone.
If you like this unit, just add it to your shopping cart right now!