206 views

How to Remove the Factory Radio and Install a 2008 2009 2010 2011 2015 MAZDA 6 Ruiyi/ Ultra Bluetooth DVD

If you want to embrace a brand new driving experience, you can upgrade your factory radio with a new aftermarket car radio. If you want to make the replacement by yourself, you need to remove your original factory radio and install a new car radio under a correct installation guide. The following is a 2008 2009 2010 2011 2015 MAZDA 6 Ruiyi/ Ultra car radio installation instruction from Seicane. If you have the same or similar dashboard, you can take this instruction as a reference.

2008 2009 2010 2011 2015 MAZDA 6 Ruiyi Ultra Bluetooth DVD GPS Car Radio after installation

2008 2009 2010 2011 2015 MAZDA 6 Ruiyi Ultra Bluetooth DVD GPS Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008 2009 2010 2011 2015 MAZDA 6 Ruiyi/ Ultra car radio installation guide

1. Remove the panel on downside of the e-brake. Please make sure your e-brake is up.

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

2. Remove the shift knob by screwing it off counterclockwise.

Remove the shift knob by screwing it off counterclockwise

Remove the shift knob by screwing it off counterclockwise

3. Remove the plastic part around the shift lever.

Remove the plastic part around the shift lever

Remove the plastic part around the shift lever

4. Release two side trims.

Release two side trims

Release two side trims

5. Remove the trim pieces around the air conditioning control.You may start from the bottom.

Remove the trim pieces around the air conditioning control.You may start from the bottom

Remove the trim pieces around the air conditioning control.You may start from the bottom

6. Remove four screws that fixed the AC control so as to drop down the AC control.

Remove four screws that fixed the AC control so as to drop down the AC controlRemove four screws that fixed the AC control so as to drop down the AC control

Remove four screws that fixed the AC control so as to drop down the AC control

7. Unscrew two bottom screws that are holding the radio.

Unscrew two bottom screws that are holding the radio

Unscrew two bottom screws that are holding the radio

8. Grab the top panel so as to remove it.

Grab the top panel so as to remove it

Grab the top panel so as to remove it

9. Remove two last screws that are holding the radio with a screwdriver.

Remove two last screws that are holding the radio with a screwdriver

Remove two last screws that are holding the radio with a screwdriver

10. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

11. Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you.

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

12. Check all the accessories for the new Seicane car radio.

13. Connect the harnesses to the back of the new Seicane car radio.

14. Connect the Seicane car radio to your original stereo’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you have any problems, you can seek help from your dealer, someone experienced or a professional technician. Anyway, it is essential for you to pick an ideal car radio. Here I would like to share an amazing 2008 2009 2010 2011 2015 MAZDA 6 Ruiyi/ Ultra car radio from Seicane with you. For more details, please click:

https://www.seicane.com/radio-gps-navigation-android-for-2008-2015-mazda-6-ruiyi-ultra-with-cd-dvd-player-bluetooth-audio-system-3g-wifi-usb-1080p-mirror-link-obd2-s18m006

This car radio can be regarded as one of your wise choices to be your best road companion since it comes with practical and entertainment features.

With the help of the text-to-speech guidance provided by the high-end 3D GPS navigation system, you can know your current location and navigate to your desired destinations. And while navigating, you can freely listen to radio, USB or music playback thanks to this unit’s dual zone function.

Besides, the Bluetooth technology makes you possible to get access to hands-free calls and streaming music from mobile phone through the wireless connection between this car radio and your Bluetooth-enabled mobile phone.

Don’t hesitate to add it to your shopping cart if you like it. Good luck!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *