When referring the installation of a new aftermarket car radio, you may worry if it is hard to finish the whole installation process or not. As a matter of fact, it is not difficult for you to remove your factory radio and install the new car radio if you have some related experience and find a correct installation guide to help you. The following is a 2006 2007 2008 2009 2010-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 car radio installation guide from Seicane, if you have the same or similar dashboard, you can refer to this guide.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2006 2007 2008 2009 2010-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 car radio installation guide
1. The original car radio.
2. Pry out the air conditioner panel along gap with a lever.
3. Remove the air conditioner panel.
4. Remove two screws holding the radio in the dashboard frame with a screwdriver.
5. Pull the buckles down.
6. Carefully take the original car radio out of the dashboard.
7. Disconnect the ISO plug of the car in the socket of the original car radio.
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original car radio’s plugs.
11. Put the new Seicane radio back into the dash.
12. Put the buckles back into its original place.
13. Install two screws and the air conditioner panel.
14. Turn on the new Seicane radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Wish you can learn something useful from the above installation guide. Before installation, please make sure every detailed step. If you cannot fully understand these steps, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly go to a car radio upgrade center to ask a technician to help you install the new car radio. Anyway, it is essential for you to pick an ideal car radio for your beloved car. If you don’t have any ideas, I’d like to share a remarkable 2006 2007 2008 2009 2010-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 car radio from Seiacane to you. For more details, please click:
This car radio is loaded with the most advanced Android 7.1.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance so as to improve your in-car experience.
Under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. Besides, this unit’s dual zone function enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.
And thanks to the built-in Bluetooth module, Bluetooth hands-free calls and Bluetooth streaming music are both available for you to gain a lot of convenience and enjoyment. Therefore you will have an amazing driving experience.
Wish you like this unit and good luck to you!