There is no doubt that with an ideal car radio installed in your car, you can enjoy great convenience and enjoyment all the way. And nowadays, most car radios are plug and play so that you can try to remove the factory radio and install the new car radio by yourself. Now I’d like to share a 2 Din universal Android car radio installation instruction from Seicane with you. Wish it is helpful for you.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2 Din universal Android car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Wish you can get some help from the above installation guide. If you meet any problems you don’t know how to deal with, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new ca radio by yourself, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, before installation, please do select an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2 Din Universal car radio from Seicane.
With this car radio installed in your car, you can get access to a wide range of practical and entertainment features, mainly including high-end 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, AUX, file management, steering wheel control, etc.
Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily locate where you are and navigate to any locations you would like to go to. Besides, this car radio comes with dual zone function which enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.
What’s more, you can make full use of this unit’s DVD player to listen to music, watch videos, TV programs, movies, etc. Therefore, you will enjoy a lot of fun.
Wish you like this unit and good luck to you!