Are you looking for some way to take your driving experience up a notch? In my opinion, it is a wise choice for you to upgrade your factory radio with a new aftermarket stereo which supports a lot of functions. The following is a step-by-step installation instruction for a 2005 Ford Fiesta Form car stereo. If you happen to have the same car model, you may take it as a reference
2005 Ford Fiesta Form car stereo after installation
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2005 Ford Fiesta Form car stereo installation instruction
Step 1: Remove the trim around gear shifter.
Remove the trim around gear shifter
Step 2: Remove screws securing center console lid with a screwdriver.
Remove screws securing center console lid with a screwdriver
Step 3: Remove the center console trim.
Remove the center console trim
Step 4: Remove console side panels on both driver and passenger sides.
Remove console side panels on both driver and passenger sides
Step 5: Remove bolts securing radio bezel and AC controls.
Remove bolts securing radio bezel and AC controls
Step 6: Unplug AC controls (from passenger side).
Unplug AC controls (from passenger side)
Step 7: Remove the radio bezel and AC controls.
Remove the radio bezel and AC controls
Step 8: Remove screws securing radio to the vehicle.
Remove screws securing radio to the vehicle
Step 9: Take the original radio out of the dash, and disconnect the connectors at the back of the radio.
Step 10: Check all the accessories for the new Seicane car stereo.
Step 11: Connect the harnesses to the back of the new Seicane car stereo.
Step 12: Connect the Seicane car stereo to your original car stereo’s plugs.
Step 13: Put the new Seicane car stereo into the dash.
Step 14: Turn on the new Seicane car stereo and check whether the stereo is working properly.
Step 15: Install all screws, trims, panels, bolts and the stereo bezel and AC controls into their original place.
Wish you can learn some skills from the above installation instruction. Before installation, please make sure that you are clear about every detail step. If you cannot totally understand these steps, you can turn to your dealer or a professional for help.
To help you better choose a suitable car radio, I’d like to share a 2005 Ford Fiesta Form car stereo from Seicane with you. Please click the link below for more details.
With the assistance of the high-end 3D GPS navigation system, this amazing car stereo enables you to get access to features like current location, landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc. So you can find the right way to reach your desired destinations.
The wireless Bluetooth technology for hands-free calls and streaming music is also supported by this unit to promise your driving safety and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this unit.
This unit functions as a CD/DVD player enables you to play whatever you like to relax both yourself and your passengers since this unit can be compatible with a lot of multimedia playback formats including DVD, DIVX, MP4, MP3, MP2, and VCD.
Don’t hesitate to add it to your shopping cart if you like it! Good luck to you!