1,124 views

How to upgrade a 2003-2010 Toyota Vios car radio with Capacitive multi-touch screen GPS navigation Radio DVD

Are you tire to use the touch pen to touch your car radio? Do you want to use multi-touch screen with smooth operation? If you want, it’s time for you to upgrade your factory car radio. In here, I’d like to introduce a detailed installation guide for a 2003-2010 Toyota Vios car radio from Seicane to you and you can take it as reference.

2003-2010 Toyota Vios car radio after installation

2003-2010 Toyota Vios car radio after installation

Here are the safety notes for the installation

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult

the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2010 Toyota Vios car radio installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash

1-1. Remove the panel with a lever and pull it away from dash

1-2

1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio

Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-2

3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t,

please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

 

That’s all the detailed installation guide for a 2003-2010 Toyota Vios car radio and wish you can learn something from that. If you still have any questions, please go to the dealer or professionals ask for help. Or you can arrange them to install it directly. Besides, you have to check your new car radio at first. To make sure whether it can work well in your car or not. If you looking for one, here is a wonderful 2003-2010 Toyota Vios car radio from Seicane to share with you. Please feel free to check it.

http://www.seicane.com/2003-2010-toyota-vios-android-radio-gps-navigation-system-dvd-player-bluetooth-capacitive-multi-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-backup-camera-ipod-mirror-link-s166957

This great 2003-2010 Toyota Vios car radio has intelligent Android 5.1.1 DVD player GPS navigation system with Quad-core CPU. The GPS makes it possible to travel around the whole country without getting lost. You are available to have a safe driving by pairing your Bluetooth-enabled cells phones with this unit and stream music to relax. Let’s enjoy the good time with it from now!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *