To enjoy more convenience and enjoyment in car, different car owners may have different options. One of the most popular and direct ways is to upgrade the factory radio with a brand new car radio which can be compatible with a wide range of comprehensive features. If you own a 2004 2005 2006 Mercedes Benz Viano Vito and find your original factory radio is outdated, you can replace it without hesitation. Now I’d like to share a detailed 2004 2005 2006 Mercedes Benz Viano Vito car radio installation instruction with you. This instruction can be taken as your reference.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 Mercedes Benz Viano Vito car radio installation instruction
1. The original car radio.
2. Use a special plastic tool to remove the trim bazel.
3. Use a plastic remove tool to push up the heat vent.
4. Remove 2 hidden screws with a screwdriver below the vent.
5. Push down the vent and loose it.
6. Remove the trim panel with a plastic removal tool.
7. Remove 2 screws that are holding the car radio.
8. Take out the original car radio.
9. Unplug the connectors and cables at the back of the radio.
10. Check all the accessories for the new Seicane car radio.
11. Connect the harnesses to the back of the new Seicane car radio.
12. Connect the Seicane car radio to your original radio’s plugs.
13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
14. Put the new Seicane car radio into the dash.
15. Put everything into their original place. All the installation is done.
After reading the above installation instruction, do you know how to remove a factory radio and replace a new one in a 2004 2005 2006 Mercedes Benz Viano Vito? If you meet any difficulties and don’t know how to overcome, you can browse some professional website, consult your dealer or turn to a professional for help. What’s more, since an ideal car radio matters a lot, it is important for you to check the compatibility between your new car radio and your car. If you don’t have ideas, you may check out the following link which is a 2004 2005 2006 Mercedes Benz Viano Vito car radio from Seicane.
This car radio is enhanced by the most stable Android 6.0 operation system, powerful 8-core 1.5 GHz RK-PX5 A53 processor, and 2GB RAM as well as 32 GB INand Flash. So it comes with the higher capacity and performance to replace your factory radio in 2004 2005 2006 Mercedes Benz Viano Vito.
With the help of turn-by-turn directions and voice prompts provided by 3D GPS navigation system of high accuracy, you can easily locate where you are and find the most suitable way to reach your desired destinations. And dual zone function makes it possible for you to play your favorite music behind the scene under GPS mode, and the music will automatically switch to GPS voice.
Under Bluetooth technology, as long as you connect your Bluetooth-enabled mobile phone or other devices to this unit, you can easily get access to Bluetooth hands-free calls as well as streaming music from your phone or other Bluetooth-enabled devices. With keeping your hands on the steering wheel and your eyes on the road ahead, your driving safety, convenience and enjoyment can all be guaranteed.
Wish you enjoy your in-car life accompanied by this car radio from now on!