552 views

How to Upgrade a 2006 2007 Mitsubishi Raider Audio Radio GPS Navigation with No Effort

It has always been the desire of many car enthusiasts to pursue a perfect in-car life. To achieve this goal, in a car, car owners can install a professionally designed car radio with the best features.

Different vehicles have different dashboard so the aftermarket DVD GPS car radio is also different. And there is also a little difference among the installations of different car radio types. This article is mainly about how to upgrade a 2006 2007 Mitsubishi Raider Audio Radio GPS Navigation. If you are an owner of such a vehicle type, you may read the following steps before you begin the car radio installation.

2006 2007 Mitsubishi Raider Audio Radio GPS Navigation after insatallation

2006 2007 Mitsubishi Raider Audio Radio GPS Navigation after insatallation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006 2007 Mitsubishi Raider car radio installation steps

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

Take the panel off the dash and disconnect the wires from the car

2-1

2-1

3. Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

Remove the four screws which are holding the unit with a screwdriver

4. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

Take out the unit and disconnect the wire harness at the back of the unit

4-1

4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio’s plugs.

Connect the Seicane car radio to your original car radio's plugs

Connect the Seicane car radio to your original car radio’s plugs

7-1

7-1

8. Put the new Seicane car radio into the dash.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put trim panel back on your new Seicane car radio after the normal test.

 

Wish the above installation steps can be helpful for you. If you have any problems, you can seek help from your dealer. If you still think it too hard for you to install the car radio by yourself,, you’d better go to a car stereo upgrade centre to ask a professional to help with your installation.

Besides, it is vital for you to check whether your new radio is compatible with your car or not. If not, you can refer to an amazing Seicane 2006 2007 Mitsubishi Raider Audio Radio GPS Navigation. For more details, please click:

http://www.seicane.com/seicane-s09206-oem-android-radio-gps-navigation-system-for-2006-2007-mitsubishi-raider-with-canbus-obd2-bluetooth-mirror-link-dvd-player-touch-screen-dvr-backup-camera-tv-steering-wheel-control-wifi-1080p-video-usb-sd

Equipped the stable Android 4.4.4 operation system, RK PX3 1.66GMHZ quad-core CPU processor and 8 GB INAND Flash, this great 2006 2007 Mitsubishi Raider Audio Radio GPS Navigation allows you to have an easier, smoother and faster operation experience. Because of the built-in Bluetooth technology, this radio enables you to make, receive or reject hands-free phone calling and stream music from your playlists in your cell phone after you link your Bluetooth-enabled mobile phone with this unit. Moreover, you don’t have to worry about getting lost even in an unfamiliar place because the high-accuracy GPS navigation system can guide you to your ideal destinations accurately. Don’t hesitate to purchase this radio for your beloved car if you like it.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *