To get more convenience in your car, you can easily upgrade your factory radio with a new aftermarket head unit which can be compatible with many up-to-date features. If it’s the first time for you to install a new unit, you may have no idea about how to install it. Now I’d like to share a step-by-step 2006-2013 Skoda Praktik car radio installation guide from Seicane with you. Wish it can be helpful for you.
2006-2013 Skoda Praktik car radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2013 Skoda Praktik car radio installation guide
1. Remove the top panel with a lever.
Remove the top panel with a lever
2. Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3. Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4. Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5. Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6. Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7. Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8. Remove the panel on the original car radio.
Remove the panel on the original car radio
9. Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10. Take the original car radio out of the dash.
Take the original car radio out of the dash
11. Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
13. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
14. Connect the Seicane car radio to your original car radio ‘s plugs.
15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16.Put the new Seicane car radio into the dash.
17. Put everything into their original place.
Can you understand all the installation steps for a 2006-2013 Skoda Praktik car radio ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2006-2013 Skoda Praktik car radio from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
The remarkable 8 inch multi-touch 2006-2013 Skoda Praktik car radio is ideal for enhancing the navigation system and upgrading your car’s factory sound system. The 3D GPS of high accuracy offers you turn-by-turn voice prompts to guide you to the destinations. This car audio and video player also has many advanced features. The on-screen menus on the generously-sized touch screen make operating it easy. It can support DVD, DIVX. MP4, MP3, MP2, VCD media formats. Wish you have an amazing time with this top 2006-2013 Skoda Praktik car radio on all your trips. Good luck!