457 views

How to Upgrade a 2007 2008 2009 Frod Edge Radio with an Aftermarket Radio Sound System

Currently, it won’t cost you too much money and time to replace your factory radio with a brand new aftermarket radio by yourself if you have some related installation experience. Installing a new multifunctional radio is beneficial to pursue higher configurations and advanced features, so more and more car owners would probably choose an ideal radio replace the factory radio. Here I would like to share 13 steps from Seicane about installing a 2007 2008 2009 Frod Edge car radio with you. Wish it can be helpful for you.

2007 2008 2009 Frod Edge car radio after installation

2007 2008 2009 Frod Edge car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2007 2008 2009 Frod Edge car radio installation steps

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Check all the accessories for the new Seicane radio

Step 10: Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Connect the harnesses to the back of the new Seicane radio

Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

That’s all the steps to install a 2007 2008 2009 Frod Edge car radio. If you have anything you cannot understand, you can turn to a professional, your dealer or an experienced person for help. But if you don’t have a suitable car radio for your car, first of all, you should select an ideal radio. Here I’d like to share an amazing 2007 2008 2009 Frod Edge car radio from Seicane with you.

http://www.seicane.com/pure-android-quad-core-dvd-gps-in-dash-radio-system-for-2007-2008-2009-frod-edge-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera-s127302

This 2007 2008 2009 Frod Edge car radio from Seicane is upgraded to the stable Android 5.1.1 operation system and a RK3188 1.6 GHz Cortex A9 Quad-core processor, which can greatly facilitate the operation and offer its users higher performance.

When you press the button “NAVI”, you are able to turn on the GPS function. With the built-in GPS navigation system, you can arrive at any location you’d like to be in through the turn-by-turn directions and voice prompts. Under the Bluetooth technology, you can make this unit wireless pair with your Bluetooth-enabled mobile phone for hands-free phone calls and streaming music. And after the installation, the steering wheel still remains its original functions.

Take this wonderful 2007 2008 2009 Frod Edge car radio on all your trips, and an exciting and brand new driving experience will always be with you from now on!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *