1,539 views

How to upgrade a 2013 2014 2015 KIA K3 car stereo with Touch Screen AUX USB SD 3G WiFi Video Radio Bluetooth

Here comes an advanced 2013 2014 2015 KIA K3 car stereo from Seicane after installation. It is equipped with the latest operation system and the CPU for you to upgrade your factory radio, which makes it an ideal replacement of a car radio.

2013 2014 2015 KIA K3 car stereo after installation

2013 2014 2015 KIA K3 car stereo after installation

 

 

To install such a car stereo in your car, a step-by-step installation guide is greatly helpful. And with some related installation experience, you can easily finish the installation on your own. However, if you don’t know how to install a new car stereo, you can ask a professional for help. The following is the detailed instructions for a KIA K3 car stereo for your reference.

 

Precautions:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

 

 

2013 2014 2015 KIA K3 car stereo installation guide

1. Pry the side panel with a lever, and then remove it.

1. Pry the side panel with a lever, and then remove it

1. Pry the side panel with a lever, and then remove it

 

2. Remove four screws with a screwdriver.

2. Remove four screws with a screwdriver

2. Remove four screws with a screwdriver

 

3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.

3. Remove the trim panel with your hands

3. Remove the trim panel with your hands

 

4. Remove four screws holding the factory radio in place with a screwdriver.

4. Remove four screws holding the factory radio in place with a screwdriver

4. Remove four screws holding the factory radio in place with a screwdriver

 

5. Take the factory radio out of the dash with your hands.

5. Take the factory radio out of the dash with your hands

5. Take the factory radio out of the dash with your hands

 

6. Unplug the connectors at the back of the factory radio.

6. Unplug the connectors at the back of the factory radio

6. Unplug the connectors at the back of the factory radio

 

7. Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

8. Put the new Seicane radio into your dashboard, you should check whether your connections are correct, the new radio is in right position, and you’d better have a tidy for the cables.

9. Check whether the new Seicane radio is working without problem.

10. If there is no problem, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.

 

That’s all the installation instruction about a 2013 2014 2015 KIA K3 car stereo. If you have any questions during the whole process, you can consult your dealer or a professional. On the other hand, if you find it too hard to understand all the steps, you’d better have it installed by a professional.

 

Besides, in order to have a successful replacement, it’s necessary for you to make sure you have a suitable stereo for your car. If you don’t have one, you can refer to the following link which is about a great 2013 2014 2015 KIA K3 car stereo from Seicane. Please check our for more details:

 

http://www.seicane.com/10-2-inch-all-in-one-android-gps-navigation-system-for-2013-2014-2015-kia-k3-with-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-usb-sd-steering-wheel-control-3g-wifi-video-radio-bluetooth-s083988

 

This intelligent KIA K3 car stereo comes with a real-time GPS navigation system, so you can easily get to your desired destination with the help of the turn-by-turn direction and voice prompts provided by the latest GPS navigation system. A safe and enjoyable journey can be easily available for you when you simply link with your enabled cell phone to dial and accept hands-free calls and stream music to relax.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *