Are you looking forward to making your car more featured? If yes, it is necessary for you to remove your factory radio and install a new one when you find your factory radio is not compatible with many new features with the technology improvement. This passage is mainly about the removal and installation of a 2016 Jeep Renegade Bluetooth Car Stereo. If you own a same vehicle type, you may refer to it.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2016 Jeep Renegade car stereo installation steps
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the stereo on the dashboard.
3. Pull the factory stereo out of the dash. Pull it with medium force, as the wires are connected to the stereo.
4. Unplug the connectors at the back of the factory stereo.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane stereo into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane stereo. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new stereo.
Before the installation, please make clear every step. Don’t worry if you cannot fully understand the above installation guide. You can seek help from your dealer, someone experienced and a professional. But if you haven’t got a suitable car stereo yet, I’d like to recommend a 2016 Jeep Renegade Bluetooth Car Stereo from Seicane to you. You may click the following link for more information.
Ever though you have a bad sense of direction, the built-in 3D GPS navigation system of this stereo can help you to some extent. With the help of the worldwide real-time navigation, you can be accurately guided to reach your desired destinations because of these features, which include 3D street view, landmark building display, turn-by-turn voice directions, etc. Besides, under the Bluetooth technology, hands-free calls and streaming music are both available by pairing your enabled mobile phone and this car stereo. Wish you like it!