How to upgrade your car Stereo GPS Navigation for 2012-2017 Toyota Camry ?

How to upgrade your car Stereo GPS Navigation for 2012-2017 Toyota Camry  ?

Sometimes the car radio removal operation easily drive people mad if they do not have any experience about it,cause it takes time and patience. Hence car owners would like to know more detailed article to lead them to deal with the complicated situation.Today’s sharing is for 2012-2017 Toyota Camry car DVD Player removal and installation. Certainly the below article will works greatly for you.

2012-2017 Toyota Camry car radio after installation

2012-2017 Toyota Camry car radio after installation

Toyota Carmy Original car interior dashboard

  Toyota Carmy Original car interior dashboard


  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.


The car GPS Navigation removal and installation for 2012-2017 Toyota Camry car radio.

Step 1 : Remove the panel with removal tool.


Step 2 : Take off the upper trim and put aside without disconnecting anything.


Step 3: Remove the side panels left and right.


Step 4 : Off the brake panel as pictures show.




Step 5 : Off 4 crews with screwdriver and take off the bolts in the center armrest with a 10 mm extension.


6-2 remove the two bolts in the center armrest with 10mm extension removal tool

Step 6 : Put below part little backwards in order to make space for offing the trim. Please disconnect the connectors behind trim.




Step 7 : Screw off the following bolts.

10 2 bolts on top

10 left bolt

10 right bolt

Step 8 : Take our the dash and unplug the back connections.



Step 9 : Remove the 6 screws,3 screws each on left and right to connect radio and heater control panel. Also get off the upper yellow flips. (Please note: flips have dual sides)


Step 10: Remove the heater control panel and then off flips again. (Please note:each flip has one flat side)

12 heater control panel

12-1 clips with one flate side

Step 11 : Off the door side panels and again off the leather stripping.

13 gps

14 panel remove

15 remove the leather stripping

Step 12 : Order the GPS & Microphone cables along the stripping and organize lines inner area properly.



17 pull the lines through the hole marked to the inner area


Step 10 : Carefully make the antennas and cables connected step by step as installation instructions show.



Step 11: Follow steps 1-10 in reverse order to install back the remaining parts.


Surely this article will bring you a lot support with the installation for 2012-2017 Toyota Camry GPS Navigation. If you still have problem about it, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information:



This 2012-2017 Toyota Carmy Car Radio  comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP,support Split Screen Display etc. It replaces your factory radio with android based system of great utility and extendability. You can download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, G-mail etc. This system also supports installation or removal of apps on RAM or SD optionally. With this car radio you will have a various ways to enjoy your driving with friends and family.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *