When it comes to the installation of a car radio, some of you may think it hard to achieve by yourself or you have tried before but failed. As a matter of fact, you can also achieve the car radio installation on your own even if you don’t have much expertise. To help with your upgrading, you should find a correct installation guide to help you. The following is a 2012-2015 Mazda CX 5 Bluetooth Stereo installation guide from Seicane. If you own the same dashboard, you can refer to it.
2012-2015 Mazda CX 5 Bluetooth Stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012-2015 Mazda CX 5 car radio installation guide
1. The original car radio.
The original car radio
2. Open the glove box and remove it.
Open the glove box and remove it
2-1
2-2
3. Release the trim panel so as to remove the air vent, then unplug the connector at the back of the air vent.
Release the trim panel so as to remove the air vent, then unplug the connector at the back of the air vent
3-1
3-2
3-3
4. Release the radio frame.
Release the radio frame
5. Remove screws that fixed the radio on the dashboard with a screwdriver.
Remove screws that fixed the radio on the dashboard with a screwdriver
5-1
6. Gently take out the original radio.
Gently take out the original radio
7. Disconnect the connectors and cables at the back of the radio.
Disconnect the connectors and cables at the back of the radio
8. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
9. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
10. Connect the Seicane car radio to your original stereo’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
Now do you understand all the above installation steps for a 2012-2015 Mazda CX 5 Bluetooth Stereo? If you cannot fully understand or have any problems you cannot deal with, you can consult your dealer for seeking advice or ask a professional for help. If you are still looking for a suitable car radio for 2012-2015 Mazda CX 5, you can check out the following link to find a remarkable 2012-2015 Mazda CX 5 Bluetooth Stereo from Seicane which can replace your factory radio.
Upgraded to the advanced Android 5.0.1 operation system, this 2012-2015 Mazda CX 5 car radio runs faster and has a better performance than ever. With a super large 10.2 inch 1024*600HD multi-touch digital capacitive LCD screen, you are able to enjoy the best display effect when it function as a DVD player and have a better view of the road ahead when you are driving. Thanks to the 3D GPS navigation system, you can go anywhere with the help of lane assist, landmark display, route planning, turn-by-turn direction and voice prompts. Just enjoy your driving along with this great 2012-2015 Mazda CX 5 car radio. Good luck to you!