660 views

Simple 11 steps to install a 2005-2011 TOYOTA Vitz Echo car radio with radio Bluetooth Touch Screen DVD Player 3G WiFi OBD2 Mirror Link Steering Wheel Control

Here shows you an excellent 2005-2011 TOYOTA Vitz Echo car radio from Seicane after installation for you. If you want to enjoy more features in your car, it’s an ideal choice for you to take into consideration. Now I’d like to introduce is detailed installation instruction to you to help with its installation.

2005-2011 TOYOTA Vitz Echo car radio after installation

2005-2011 TOYOTA Vitz Echo car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2011 TOYOTA Vitz Echo car radio installation steps

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane car radio. Connect the harnesses to the back of the new Seicane car radio.

7.Connect the Seicane car radio to your original car radio ‘s plugs.

8.Put the new Seicane car radio into the dash.

9.Turn on the new Seicane car radio and have a comprehensive check if it works well.

10.Install 4 screws back to their original position.

11.Install the trim panel back to its original place.

Are you able to understand all the installation steps for a 2005-2011 TOYOTA Vitz Echo car radio ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this modern 2005-2011 TOYOTA Vitz Echo car radio from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s126012-2005-2011-toyota-vitz-echo-aftermarket-android-gps-navigation-system-with-radio-bluetooth-touch-screen-dvd-player-3g-wifi-obd2-mirror-link-steering-wheel-control

With GPS navigation built in, the 2005-2011 TOYOTA Vitz Echo car radio can lead you to your desired destination on time and stress free. It also comes with Bluetooth for safer driving while you are receiving and making phone calls. What’s more, you are able to listen to music via bluetooth and watch your favorite TV programs through DVB-T for more entertainment on your way. Just have with this amazing 2005-2011 TOYOTA Vitz Echo car radio from now on!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *