There is no doubt that an ideal car radio can greatly help you create an in-car environment full of convenience, comfort and entertainment as well as improve your driving experience. Therefore, if you are desired of improving your in-car life, it is highly suggested that you should replace your factory radio with a new aftermarket car radio. And as for the installation, you can find a correct installation instruction to help with the installation. This article is mainly about how to remove your factory radio and install a Seicane 2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio. If you have the same or similar dashboard, you can refer to the following installation guide carefully.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio installation instruction
1. Remove the top panel with a lever.
2. Disconnect the connector at the back of the panel.
3. Unscrew the screw with a screwdriver.
4. Remove the metal sheet on the top with your hands.
5. Unscrew two screws circled in red shown as follows under the metal sheet.
6. Remove the air conditioner vent with your hands.
7. Unscrew two screws under the vent with a screwdriver.
8. Remove the panel on the original car radio.
9. Unscrew four screws holding the original car radio with a screwdriver.
10. Take the original car radio out of the dash.
11. Disconnect all the connectors at the back of the original car radio.
12. Check all the accessories for the new Seicane car radio.
13. Connect the harnesses to the back of the new Seicane car radio.
14. Connect the Seicane car radio to your original car radio’s plugs.
15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane car radio into the dash.
17. Put everything into their original place.
Now do you have a general understanding of the installation on a 2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio? If not, please feel free to contact your dealer for seeking advice, or turn to a professional for help. Or you can ask someone experienced to help you alongside during the installation. Besides, it is essential for you to pick an ideal car radio for your beloved car. Here I would like to recommend a remarkable 2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio from Seicane to you. For more details, please click:
This car radio is upgraded to the most stable Android 7.1 operation system and a powerful quad-core CPU processor, so you can regard this car radio as one of the best replacements for your factory radio.
With the assistance of this high-end 3D GPS navigation system, you can get access to these features, mainly including current locations, landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc. So you can have the most suitable route options to get to any locations you would like to go to. And this unit’s dual zone function enables you to freely enjoy music while navigating.
Besides, under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute hands-free calls as well as freely listen to Bluetooth streaming music from your phone, which bring you both convenience and enjoyment.
Wish you enjoy your driving accompanied by this unit. Good luck to you!