At present, although ideal car stereos become more available for car owners, you still have to pay extra money and time for its installation if you go to a car stereo upgrade center. However, if you have some related installation experience as well as a correct guide, you can also finish the installation process by yourself, which can save your both money and time. Here I’d like to share several installation steps on a 2000-2006 Toyota Corolla car stereo. If you have the same or similar dashboard, you can refer to these steps carefully.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2000-2006 Toyota Corolla car stereo installation steps
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Do you get some inspiration from the above installation steps? If you have any doubts you cannot overcome independently, you can turn to your dealer or a professional for help. Or you can straightly ask a professional technician to help you install the new car stereo. Besides, if you are still looking for an ideal car stereo but don’t know which kind of car stereo can fit your car very well, then you can check out the link below which is a powerful 2000-2006 Toyota Corolla car stereo from Seicane.
This powerful car stereo is running on the most stable Android 6.0 operation system, 8-core 1.5 GHz RK-PX5 A53 processor and 32 GB Inland flash as well as 2GB RAM. So you are able to have an excellent operation experience due to enhanced capacities, improved performance and configuration.
Under the guidance of the high-precision 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts even though you have no good sense of directions. Besides, you can freely enjoy music while navigating thanks to dual zone function.
What’s more, you can make full use of this unit’s built-in Bluetooth module to wireless pair your Bluetooth-enabled mobile phone with this unit. Thus, without taking your hands off the steering wheel, you can make, answer, reject and mute hands-free calls as well as stream music to keep you both safe and enjoyable on all the trips.
Wish you like it and good luck to you!