You may be fed up with your factory radio since it is not compatible with some modern features after a long term use. Under this circumstance, it is a wise choice for you to replace your factory radio with a more up-to-date car radio with a lot of features. And for the installation, you can find a related installation instruction to help you deal with the installation. The following is a 2005 2006 2007 2008 2009-2012 Mercedes Benz ML CLASS W164 ML350 ML430 ML450 ML500 car radio installation instruction from Seicane, if you have the same or similar dashboard, you might as well take this instruction as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2005 2006 2007 2008 2009-2012 Mercedes Benz ML CLASS W164 ML350 ML430 ML450 ML500 car radio installation instruction
1. The original car radio.
2. Pry the bottoming panel out of the dash with a plastic knife.
3. Pry the air conditioner panel out and remove it.
4. Remove two screws that fixed the radio on the dashboard with a screwdriver.
5. Use your finger to pull the buckles down.
6. Gently pull the factory radio out of the dash.
7. Then unplug the connectors at the back of the factory radio.
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original radio’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
Wish the above installation instruction can be helpful for you. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly ask a technician to help you install the new car radio. Besides, if you are still looking for an ideal car radio for your beloved car, I’d like to recommend a great 2005 2006 2007 2008 2009-2012 Mercedes Benz ML CLASS W164 ML350 ML430 ML450 ML500 car radio from Seicane to you. For more details, please click:
Based on the most advanced Android 7.1 operation system and a powerful CPU processor, this car radio specific for 2005 2006 2007 2008 2009-2012 Mercedes Benz ML CLASS W164 ML350 ML430 ML450 ML500 can be regarded as the best replacement for your factory radio.
Thanks to this unit’s high-accuracy 3D GPS navigation system, even you don’t have a good sense of directions, you don’t have to worry about getting lost any more. With the help of the 3D GPS navigation function, you can be provided with the best route accurately so as to reach your ideal destinations through turn-by-turn direction and voice prompts.
What’s more, under the wireless Bluetooth technology, as long as you connect your Bluetooth-enabled mobile phone to this car radio, you are able to dial, receive, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone playlists.
Wish you like this unit and good luck to you!