At present, there is a trend that more and more car owners choose to replace their factory radio with a new aftermarket car stereo. If you want to catch up with the trend and upgrade the capabilities of your car, then you can consider installing a brand new multifunctional car stereo in your car. Here I would like to share a 1996-2009 TOYOTA PRADO car stereo installation instruction with you. If you have the same or similar dashboard, you can refer to this instruction to help with the installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1996-2009 TOYOTA PRADO car stereo installation guide
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Wish the above installation guide can do some help for your installation. If you come across some problems and don’t know how to deal with them, you might as well seek help from your dealer, someone experienced or a professional. Besides, it is very essential for you to select an ideal car stereo for your beloved car. If you don’t know which kind of car can fit your car well, you can check out the link below which is a remarkable 1996-2009 TOYOTA PRADO car stereo from Seicane.
There is no denying that you are going to have a much smoother and faster operation experience since this great car stereo is loaded with the stable Android 6.0 operation system, powerful 8 -core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM.
The high-precision GPS navigation system is specially built in this unit to enable you to have no difficulty finding the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. Besides, you are able to freely enjoy your favorite music from radio/AV/DVD/TV while you are navigating to your destinations.
Moreover, you can take advantage of this unit’s DVD player function to play wonderful videos, TV programs and movies, etc. Therefore, both you and your passenger won’t easily get tired and bored in your car any longer.
Wish you have a relaxing trip accompanied by this unit and good luck to you!