210 views

The Straightforward Installation Instruction on a 2011 2012 2013 2014 2015 2016 JEEP Wrangler Car Stereo with GPS Navigation Bluetooth Audio System

As the technology rapidly develops, an ideal car radio should be compatible with a higher performance and various functions. If your factory radio can not support many modern features, then it is wise of you to replace your factory radio with a new aftermarket car radio. This article will mainly introduce how to remove the factory radio and install the new aftermarket car radio for 2011 2012 2013 2014 2015 2016 JEEP Wrangler. If you have the same or similar dashboard,  you can refer to this instruction carefully.

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio after installation

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

Get the window control out of the original place, so that you can get access to the screw that is behind it

Get the window control out of the original place, so that you can get access to the screw that is behind it

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control

2-1

2-1

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out

3-1

3-1

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side

4-1

4-1

4-2

4-2

4-3

4-3

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray

5-1

5-1

5-2

5-2

6. Next you are going to pull away the trim under the steering wheel.

Next you are going to pull away the trim under the steering wheel

Next you are going to pull away the trim under the steering wheel

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

8. Firmly pull the dash and it should be clipped out.

Firmly pull the dash and it should be clipped out

Firmly pull the dash and it should be clipped out

8-1

8-1

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

With the dash removed, you now can have access to the four bolts that are holding the original car radio

With the dash removed, you now can have access to the four bolts that are holding the original car radio

10. Remove these four bolts with the seven millimeter screwdriver.

Remove these four bolts with the seven millimeter screwdriver

Remove these four bolts with the seven millimeter screwdriver

11. With all the bolts removed, the original car radio should simply slide out from the original place.

With all the bolts removed, the original car radio should simply slide out from the original place

With all the bolts removed, the original car radio should simply slide out from the original place

11-1

11-1

12. Disconnect the factory connectors and wires at the back of the original car radio.

Disconnect the factory connectors and wires at the back of the original car radio

Disconnect the factory connectors and wires at the back of the original car radio

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is very essential for you to pick an ideal car radio. If you have no ideas, you can refer to a remarkable 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/android-2008-2014-2015-2016-2017-jeep-wrangler-bluetooth-gps-radio-car-stereo-with-mirror-link-wifi-steering-wheel-control-plug-and-play-h201

To be honest, this unit can be regarded as one of the best replacements for your factory radio since it is equipped with eight-core CPU, 4G RAM and 32G ROM, and it’s operation system has been upgraded to the most advanced and stable Android 8.0 version.

With the assistance of the worldwide real-time GPS navigation system, this unit enables you to know your current locations and find the right way to reach any locations you would like go to. And thanks to this unit’s dual zone function, you can listen to your favorite music while navigating.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so as to get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music.

As for main features of this car radio, it can support the steering wheel control, headlamp output, reverse output and ACC output. And this unit can support hand brake detecting, the door information display and the original car’s amplifier.

If you like this unit, you can add it to your shopping cart right now. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *