As a car owner, you may find that you cannot catch up with the trend for your factory radio cannot be compatible with some modern and advanced features. Under this circumstance, it is wise of you to replace your factory radio with a brand new aftermarket car radio. And if you plan to make the replacement by yourself, you can refer to a detailed car radio installation guide. The following is a 2003 2004 2005 2006 2007-2010 Toyota old Vios car radio installation guide from Seicane. You might as well take it as a reference if you own the same or similar dashboard.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003 2004 2005 2006 2007-2010 Toyota old Vios car radio installation guide
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
If you meet any problems you cannot deal with independently, you can consult your dealer, communicate with someone experienced or seek help from a professional. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. What’s more, if you are still searching for a suitable car radio for your beloved car, I’d like to share a remarkable 2003 2004 2005 2006 2007-2010 Toyota old Vios car radio from Seicane with you. For more details, please click:
This car radio, specific for 2003 2004 2005 2006 2007-2010 Toyota old Vios, is loaded with the intelligent stable Android 6.0 operation system and a powerful quad-core CPU processor, which enhances its better capabilities and performance to provide its users with better service.
With this car radio installed in your car, you don’t need to worry about getting lost any longer because this car radio is equipped with the high-end 3D GPS navigation system. Thanks to the high-end 3D GPS navigation system, you can get access to 3D street view, landmark building display, turn-by-turn directions, voice prompts, etc, therefore, you can quickly locate where you are and accurately navigate to any locations you would like to go to. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating.
If you like this all-in-one car radio, just add it to your shopping cart. Good luck to you!