360 views

The Useful Tutorial on a 1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser GPS Bluetooth Car Radio Removal and Installation with Speaker Antenna Audio System

There is no doubt that you will have a very pleasant and relaxing time if you drive your own car to have a trip with your families or friends. If you want to keep your families and your friends entertained in their seats all the way, it is a good idea for you to replace your factory radio with a new multifunctional car radio. If you have ever installed a car radio, then you can follow a correct installation guide to finish the installation on your own. Here I’d like to introduce a step-by-step 1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser car radio installation guide. If you own the same car model, please refer to it carefully.

1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser GPS Bluetooth Car Radio after installation

1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser car radio installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Put the new Seicane car radio into the dash.

10. Turn on the new Seicane car radio and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

Before installation, please make clear every detailed step. If you encounter any difficulties and don’t know how to overcome them, you can seek help from your dealer, someone experienced or a professional. Besides, if you still think it too hard for you to finish the whole installation process, you’d better arrange a technician to help you install the new car radio. To help you select a car radio which can fit your beloved car well, here I would like to recommend a great Seicnae car radio for 1996-2001 TOYOTA RAV4 Camry Corolla Vitz Echo Terios Land Cruiser to you. Please click the link below for more information.

https://www.seicane.com/oem-8-core-android-car-stereo-gps-system-for-1996-2001-toyota-racamry-corolla-vitz-echo-terios-land-cruiser-with-bluetooth-radio-dvd-3g-wifi-obd2-mirror-link-s126003e

This remarkable car radio from Seicane is loaded with the intelligent Android 6.0 operation system, 8-Core 1.5 GHz RK-PX5 A53 processor, and 32GB Inland flash as well as 2GB RAM to enhance its capacities, configuration and performance.

The high-precision 3D GPS navigation system is specially built in this unit, so you can locate where you are and have the best route option to get to wherever you want to go without making mistake and being late.

Besides, under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this powerful car radio so that you can get access to hands-free calls and streaming music to keep both yourself and your passengers safe and relaxed all the way.

Just enjoy your trip with your families or friends accompanied by this great car radio.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *